Aerotech
Linear Translation Stages
Aerotech
offers a complete line of screw-driven stages to complement the Laser Edge direct-drive
product line. All stages
have
an integral metal waycover that is impervious to the hot sparks and debris that
are a by-product of laser processes. Both
-impregnated
hard coat (Rockwell 62 hardness) that is scratch resistant
the
waycover and tabletop are treated with a Teflon
®
and
provides long lasting durability. The stages are further protected by a tensioned
side-seal system. The side-seal system is
in
a vertical orientation that prevents the accumulation of debris, which is a
common problem in captive bellows or top-
sealed
systems. An optional air-purge is available that allows air to be forced into
the body of the stage, creating a positive
pressure
that prevents fine particulates from migrating into the stage.
.
ATS1000
has various optional configurations including no
cover,
bellows cover, and hard cover with side seals
.
ATS1100
includes an integral brushless, slotless motor
that
reduces overall length by approximately 30%
compared
to the ATS1000
.
8
mm pitch screw gives a peak linear speed of 400 mm/s
.
Travels
up to 600 mm (24 in) are available
.
Load-carrying
capability of 70 kg (154 lb)
.
Suitable
for vertical applications with optional holding brake
.
Larger
cross section than ATS1000/1100 provides
increased
stiffness
.
Precision
ground 0.2 in and 4 mm pitch screws with a
peak
linear speed of 220 mm/s (9 in/s)
.
Optional
sinusoidal and digital output linear encoders
.
Travels
up to 300 mm
.
Load-carrying
capability of 80 kg (176 lb)